Technical Information

Technical Information

Printing technology sharing and the latest industry trends

Judging by appearances for twenty years, you may have been seeing things all along.


Release Time: 2026-11-17 11:00:00.042

One of the most common disputes in a printing plant:

The captain said, “I’ve been checking this color at the machine all afternoon; it’s fine.”

The customer said, "When we inspected the goods, the color was wrong."

Neither of the two people told a lie. It is not the color that changes, but the conditions under which we “see.”


 

It doesn't look like " Take a look ”

In the printing and packaging industry, instruments provide the data, but in the end, it’s often the human eye that makes the final call. Samples are approved by sight, inspections are carried out by sight, and even when disputes arise, it still comes down to the eye.

This brings to light a fact that is easily overlooked: Visual inspection is part of the process, yet it has never been managed as a formal process. 。 Machines have maintenance schedules, and instruments have calibration cycles; only “color assessment” relies on habit, experience, and intuition.

In 2024, we published an article titled “Why Visual Color Assessment Is Not Enough,” which discussed the prevailing practices at the time. More than two years later, these issues continue to arise daily in many factories. This piece takes a closer look at the practice of “color matching by sight”: where the problems lie and how to address them.


 

The Four Most Common Mistakes

Mistake one: Match the color under the window. The color temperature of sunlight changes from morning to evening and also differs between sunny and overcast days. Comparing colors by a window means that the light source shifts with every glance. The industry standard is to view samples under a standard light source (D50)—the principle of which we discussed in “ Metamerism 》I’ve covered that in the previous piece, so I won’t go into detail here. If the lighting isn’t right, everything else is for nothing.

Mistake Two: Take a photo and send it on WeChat for confirmation. Your phone’s screen isn’t calibrated, and the customer’s certainly isn’t either. Photos can give you a rough idea of what something looks like, but they can’t confirm whether it meets specifications. To verify the color, send a physical sample or agree to evaluate it under the same conditions.

Mistake Three: The material of the physical standard is incorrect. It’s normal for the color swatches printed on coated paper to not perfectly match the colors on the film—after all, the same ink behaves differently on different substrates. Physical standards should be made from the same materials as the product.

Mistake Four: Every screen has a color cast. From the camera to the design department’s monitor to the customer’s phone, any screen in the chain can show a color shift. Electronic color matching can work, but only if the devices along the chain have been calibrated—and even then it can only serve as an aid, not as the final authority.


 

A light box isn’t meant to be just a decoration.

Many factories have purchased it. Standard Light Source Light Box , it sits idle after being used for a while. The reason is usually not that the equipment is inadequate, but that no rules have been established. It seems we need to operate according to discipline, which mainly involves three levels:

Environment. There should be no other light outside the light box—window light or desk lamps can all distort your judgment; do not stack anything inside the box; and people viewing the sample should avoid wearing clothing with large blocks of color.

Operation. Place the sample on the bottom of the box, parallel to the light source; position the two samples to be compared side by side, touching—any gap between them can deceive the eye; view for 5 to 10 seconds then look away, as staring for too long causes your eyes to “adapt,” making the match increasingly inaccurate; check again under a different light source to ensure the match isn’t specific to just one type of illumination.

Process. The sooner you check, the easier it is—during the proofing stage, you realize the changes are in the files; once it’s printed, you realize the changes mean extra costs. In the end, we put all of this into written guidelines so that anyone reviewing the proofs gets the same result.


 

First, judge by the person.

One more thing: most factories never check this—do the people inspecting the samples have normal color vision?

Color vision deficiency is not uncommon, and most people are unaware of it. We will not provide specific statistics here—definitions and methodologies vary across sources—but rather offer a clear recommendation: Individuals involved in color matching and sample approval must undergo one training session before starting work. Color Vision Test 。 The established method is the Farnsworth-Munsell 100 Hue Test, which has been around for decades and takes about ten minutes per round.

No matter how standard the light box is, it can’t fix your eyes.


 

Write down the rules.

Viewing samples and taking measurements are not mutually exclusive: Instrument tube data, eye tube confirmation. The instrument tells you the deviation, but the customer ultimately inspects with their eyes—so the eyes must operate under controlled conditions.

Putting these conditions in writing takes just one page: what kind of light source to use, how to position it, how long to view it, who must sign off, and how to handle disputes. Once documented, the viewing process no longer depends on who happens to be present that day.


 

About Kaiyin Technology

High-tech enterprises: Kaiyin Technology is National High-Tech Enterprises, Specialized, Refined, Distinctive, and Innovative Enterprises, and Innovative Enterprises , located in Shenzhen City Shenzhen-Hong Kong Science and Technology Innovation Cooperation Zone , dedicated to serving commercial printing and packaging companies as well as brand owners Providing end-to-end prepress and color management solutions and services 。

Scope of Business: The company’s business encompasses X-Rite color measurement and closed-loop systems, Kodak prepress CTP solutions, GMG color consistency solutions, ESKO packaging design, and Kongsberg digital cutting systems, and it holds certifications for after-sales service engineers of these related products.

Success Stories: We provide Numerous international and domestic brands and printing and packaging companies offer prepress and color management services. , brand-name clients include Apple, Huawei, Amway China, Microsoft, Disney, Harman, Pure Cotton Era , Liangpinpuzi, Hasbro, and others; its printing and packaging enterprise clients include Meiyingsen, Gaoyi Packaging, Artron, Toppan Lifeng, China Business, R.R. Donnelley, Hongxing Printing, and others.

Development philosophy: We have always adhered to “Leading Technology, Empowering the Printing Industry” The company’s philosophy is to bring world-leading technologies and products into the domestic market, providing customers with consulting, sales, and after-sales support for prepress, printing, and color management solutions. Our team of seasoned industry experts It also provides enterprises with training services for international printing standardization certifications such as G7, GMI, and PSO. , helping customers establish a long-term, stable color management system.

Some of the pictures and texts in this site are collected and collated from the network for learning and exchange only. The copyright belongs to the original author. If you have violated your rights, please contact us to delete them in time.

More News

Kaiyin Technology - Awarded "Specialized and New Enterprise"

Kaiyin Technology, with its professional R&D and service teams, sound management system, and excellent innovation mechanism, successfully passed the enterprise self-assessment, Shenzhen municipal preliminary examination, and national ministry review procedures, ultimately winning multiple honorary titles including "Specialized and New Enterprise," "High-tech Enterprise," and "Innovative Small and Medium-sized Enterprise." The acquisition of these honors is a high recognition of Kaiyin Technology's innovation capabilities, technological R&D strength, and industry specialization, and further affirmation of the company's innovative development achievements. It marks another significant step forward for Kaiyin Technology in technological innovation and development in its specialized field.

The press settings have been adjusted for the expanded print run, so why is the gray balance still off?

What exactly the G7 regulates, what it does not regulate, and why the “curve adjustment” approach is difficult to implement effectively.

Judging by appearances for twenty years, you may have been seeing things all along.

One of the most common disputes in a print shop: the press operator says, “I’ve been watching this color at the press all afternoon; it’s fine.” The customer replies, “When we inspected the job, the color was wrong.” Neither of them is lying. It’s not the color that has changed—it’s the conditions under which the color is being viewed.

Is G7 certification really worth it?

The brand’s auditor visits the factory, and the buyer goes through the checklist item by item, pausing at one line: